How to Replace a UPVC Window Handle

If your window handle made of upvc is damaged, don't panic. Replacing the upvc handle on a window is a simple job that can be completed in just a few easy steps.

If you are using a cranked or an in-line espagnolette window handle, they all come with a square spindle bar that extends out from the back plate and is slotted into the locking mechanism.

Find out the type and the size of the lock and handle

Over time, window handles or locks may become damaged and lose their functionality. The good thing is that this issue can often be repaired without replacing the entire window unit made of uPVC. One of the first things you need to do is determine the type of lock and handle you have because this will help determine the replacement parts you will need.

You can identify the type of handle by looking at the base. A screw or pin will secure the handle to its base. If the screw is missing, this can be a sign that the handle has broken off from its base section. If the handle is broken internally and does not hold onto the spindle anymore it could be an indication that the handle should be replaced.

There are a variety of uPVC handles that are available, but the Espag handle is the most popular. They are usually secured with two bolts and the spindle works with the locking mechanism of the window frame. These handles are commonly used on tilt and turn uPVC windows.

Another kind of uPVC window handle is the Cockspur handle. They're similar to Espag handles, but they have smaller projections from the frame. These handles are generally used on older uPVC window frames.

Finally, there are also Venetian window handles that are similar to the Espag handle, but have an elongated base that allows them to be positioned to the frame. These are a great choice for homeowners who want an elegant, stylish handle that will blend in with their uPVC window frames. These handles come in a variety of colors that can be matched to any design.

Take a measurement of the spindle

Before ordering a new handle, it's crucial to know how the old one is attached. This will tell you how tight or loose it is and if it can fit properly into the window frame. This can be determined by identifying the handle type and determining the spindle's measurement. The spindle is the metal shaft that connects the handle to the lock in the window frame. The spindle comes in various sizes. The current industry standard is 8mm. Older handles might have a cross-section of 9mm, therefore you'll need to take measurements of your old handle to ensure you get the correct size replacement.

There are a variety of window handles. However, the most commonly used are inline Espagnolette and cockspur handles. These handles are operated by an locking mechanism within the window, using shootbolt rods that secure the window when it's closed. Depending on the type of handle they are secured in place using pins or screws.

You can find replacement handles for windows made of upvc online and in most DIY stores. They are available in a variety of finishes, and are suitable for windows that are new or replacement. They can also be key-locking or non-locking for additional security.

To take off the handle just open the window towards the door and then remove all screws that hold it in place. Be careful not to damage the screws and put them in a container for later use. After the screws have been removed, carefully pull out the handle and take a measurement from the base to the top of the spindle. This will give you the information necessary to purchase the correct replacement. The handle's spindle is the metal shaft that connects it to the lock gearbox inside the window frame.

Remove the old handle

The replacement of the handle of a uPVC window handle is a simple task and usually will take less than five minutes using the right tools. The first thing to do is determine the kind and size of the handle or lock. This will allow you to choose the right replacement. After that, measuring the spindle will ensure that the new handle is a suitable fit. In the end, replace upvc window handle you'll need remove the handle you have been using and replace it with the new one.

Most uPVC handles have inline Espagnolette handles. These handles have an internal spindle that slots into the locking mechanism of the window. These are generally easy to take off, but you may have to apply force to remove them if they're stuck. There are typically two screws that hold the handle in place which can be removed with a screwdriver or pliers. Depending on the type of handle, you may be required to take out any pins holding it in place.

Once the screws are removed After that, you can take off the handle. When the handle is opened and the top of the baseplate will be visible. This will reveal two additional screws that can be unscrewed. If the sticker remains visible, you'll have to remove it.

With the screws that came off the handle, you are now able to screw the new handle into the appropriate position. Make sure that the screw holes are aligned on the window with the holes in the handle. After you've done this you can replace the screw caps. Test the new handle. It's simple to replace a uPVC, but you need to do it right.

Install the new handle

It's time for you to install your new handle if it has been successfully removed the old one from the frame. Begin by finding the screw covers and then lifting them out with your screwdriver. Once removed, place them in a safe place and proceed to the next step.

Then, screw the spindle in by aligning it with the existing hole. The holes on the handle with the ones in the window frame. Use a screw that is the same size as the previous.

The uPVC Espag handle comes fitted with a spindle of 7mm square that rotates the lock mechanism that is mounted on the window. This style of handle is found in most modern uPVC windows. uPVC Cockspur (also called by the name Cotswold) handles have a long, curved nose that locks onto the frame's outer or cross member of the transom bar. They are usually seen on older uPVC windows.

It's important to lock and unlock the window a few times after the handle has been put in place. If everything goes according the plan, the replacement uPVC handle should be securely fixed and operating smoothly. If not, the steps listed above will help you identify any problems and resolve it quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or any other glazed home improvements. Our glaziers are able to repair or replace various window frames and handles. This makes us an excellent choice for double glazed window replacement glazing.

Test the new handle

Over time, uPVC handles can get damaged and worn out. This can make them less secure and effective and therefore it is important to replace upvc window handle [Source] them as quickly as possible. This is also a good option to consider when you upgrade your windows. Change your lock mechanism and handle will help to maintain your new windows' integrity.

There are a variety of uPVC window handles. Some are secured by pins or screws while others feature blades that fit into the lock mechanism. Each type has its own method of replacement, so it's important to know what type you have before you start working on it.

The most well-known kind of window handle is called the espag. They're typically used on newer uPVC Windows. The spindle extends from the handle into the lock gearbox, and it activates the locking system when you open the window. They are also easy to take off however you should be careful not to damage the mechanism or the handle when taking them off.

Cockspur window handles are a popular option for uPVC windows. They're secured by a spur that is snagged onto an elongated striker plate that is attached to the frame, and when you shut or tilt the window, it triggers the locking mechanism. This type of handle can be more difficult to repair than other types, but it's an excellent choice for most homes.

Venetian handles are connected to the frame using two bolts, and they have a low projection on the frame. This differs from the Espag handle. They're great if you want a flush handle that blends with your uPVC windows. These are great for both residential and commercial properties.